Anshan Anza Electronic Power Co.,Ltd.

The tape has very good deformation characteristics. For some materials, the value of relative elongation exceeds 300%.
The tape can be operated in a wide temperature range. For some compounds, it exceeds + 250 °C. These materials also have high frost resistance in excess of -50 °C.
The tape can resist various aggressive environments.

During the repair and manufacturing of the motor, when the anchor and the rotor are bound, the motor, a special electrical insulation material, and a glass strap are usually required. This material is necessary when applying bandages to motor and motor anchors and rotor windings with heat resistance classes "F" (155 °C) and "N" (180 °C). After heating the armature / rotor to the required temperature of 155 °C (180 °C) by the required technique, the heat treatment time of the bandage made of LSBE-155 (LSBE-180) tape is 1 hour.

Cyber tape is available in various options of width and density, tensile strength across the entire width of the tape varies from 14 kg., For the narrowest kipper electrical tape, 10 mm wide and a linear density of at least 1.78 g / m, up to 48 kilograms, for tape with a width of 50 mm and a density of 8.57 g / m.

PVC Insulating Tape - Electrical insulating PVC tape with a sticky layer is made on the basis of a film of polyvinyl chloride insulating plastic compound with a sticky layer based on perchlorovinyl resin applied to one side.
Designed for insulation of wires and cables during repair and splicing of electric cables with non-metallic sheaths, operating in a static state at temperatures from minus 50 to plus 70 °C.

Tape is the most commonly used material for packaging corrugated boxes.
Standard tape with a width of 48 mm is most commonly used in various packaging.
The width of the packaging tape is 72 mm, which ensures the integrity of the sealed, especially heavy or fragile boxes.
Our various thickness tapes can be used in various fields of activity.

The self-adhesive tape LETSAR is used as an insulation material in the electrical industry and has adhesion to the polyethylene insulation layer of cables, LETSAR tape, steel, copper and aluminum.
LETSAR adhesive tape is designed for the temperature range from minus 50 to plus 250 °C, and can self-aggregate at (15-35) °C for 48 hours without heating.

The insulating tape HB is made of cotton fabric and is wrapped around a plastic or paper sleeve. The functional dimensions of electrical tape hb-thickness 0.30 ± 0.05 mm, width 10 to 50 mm-ensure its uniform tension and distribution during winding.
The insulating tape HB is made of cotton fabric and is wrapped around a plastic or paper sleeve. The functional dimensions of electrical tape hb-thickness 0.30 ± 0.05 mm, width 10 to 50 mm-ensure its uniform tension and distribution during winding.